Caring for Your Device
It is important that you regularly clean your AirSense 10 device to make sure you receive optimal therapy. The following sections will help you with disassembling, cleaning, checking, and reassembling your device.
WARNING
Regularly clean your tubing assembly, humidifier, and mask to receive optimal therapy and to prevent the growth of germs that can adversely affect your health.
Disassembling
- Hold the humidifier at the top and bottom, press it gently, and pull it away from the device.
- Open the humidifier and discard any remaining water.
- Hold the cuff of the air tubing and gently pull it away from the device.
- Hold both the cuff of the air tubing and the swivel of the mask, then gently pull them apart.
Cleaning
You should clean the device weekly as described. Refer to the mask user guide for detailed instructions on cleaning your mask.
- Wash the humidifier and air tubing in warm water using mild detergent.
- Rinse the humidifier and air tubing thoroughly and allow to dry out of direct sunlight and/or heat.
- Wipe the exterior of the device with a dry cloth.
Notes
- The humidifier may be washed in a dishwasher on the delicate or glassware cycle (top shelf only). Do not wash at temperatures higher than 65 °C.
- Do not wash the air tubing in a dishwasher or washing machine.
- Empty the humidifier daily and wipe it thoroughly with a clean, disposable cloth. Allow to dry out of direct sunlight and/or heat.
Checking
You should regularly check the humidifier, air tubing, and the air filter for any damage.
Check the humidifier
- Replace the humidifier if it is leaking or has become cracked, cloudy, or pitted.
- Replace the humidifier if the seal is cracked or torn.
- Remove any white powder deposits using a solution of one part household vinegar to 10 parts water.
Check the air tubing
- Replace the air tubing if there are any holes, tears, or cracks.
Check the air filter
- Replace the air filter at least every six months.
- Replace the air filter more often if there are any holes or blockages caused by dirt or dust.
To replace the air filter
- Open the air filter cover and remove the old air filter. The air filter is not washable or reusable.
- Place a new air filter onto the air filter cover and then close it. Make sure the air filter is fitted at all times to prevent water and dust from entering the device.
Reassembling
When the humidifier and air tubing are dry, you can reassemble the parts.
- Connect the air tubing firmly to the air outlet located on the rear of the device.
- Open the humidifier and fill it with room temperature water up to the maximum water level mark.
- Close the humidifier and insert it into the side of the device.
- Connect the free end of the air tubing firmly onto the assembled mask.